ATF ATF V3 - All in 1 Ultimate Adapter

 

ATF-V2 - All-in-1 Ultimate Adapter For ATF Box This adapter supports JTAG / EMMC / ISP / MMC cards.

ATF-V2 Unique Features:
  • ON - Strong PULL-UP resistors will be applied to eMMC CMD (blue) and DATA (green) lines. This is very useful feature for phones that require VccQ and Vcc power connections (Samsung, HTC, etc.)
  • OFF - PULL-UP resistors WILL NOT be used. This is normally done with Nokia Lumia phones which do not require VccQ and Vcc connections for a more stable link, set switch to "ON" and make sure to connect required power to VccQ and Vcc lines
  • 3.3v - Most of new and old Micro SD cards are compatible with 3.3v Vcc
  • 1.8v - With this option future low-powered Micro SD cards would be supported as well
For eMMC Use Only:
  • NC - Secondary CLOCK will not be used for eMMC communication*
  • CLK2 - Secondary CLOCK will be used for eMMC Communication

*When adapter is used for a NON-EMMC connection such as JTAG or Micro SD card, make sure that DIP switch is set on the "NC" position.
"CLK2" is NOT REQUIRED for most eMMC chips, but setting DIP switch to "CLK2" will give you a stronger CLK (red) signal for better eMMC communication.

ATF-V2 - Package Content:
  • ATF Version 3 All-in-1 Adapter for ATF Box – 1pc.
  • FPC Ribbon Cable – 2pcs.
  • Lumia 510 / 610 Connector – 1pc.
  • Molex Port for Lumia 610/510 – 1pc.
  • BGA PCB 153/169 – 1pc.
  • BGA PCB 182/186 – 1pc.
  • Copper Wire 0.1 mm – 1pc.
  • Cellphone Opening Kit – 1 set.
4 stars, based on 1 CREDIT 45 CREDIT 45

ATF V3 - All in 1 Ultimate Adapter


 

ATF-V2 - All-in-1 Ultimate Adapter For ATF Box This adapter supports JTAG / EMMC / ISP / MMC cards.

ATF-V2 Unique Features:
  • ON - Strong PULL-UP resistors will be applied to eMMC CMD (blue) and DATA (green) lines. This is very useful feature for phones that require VccQ and Vcc power connections (Samsung, HTC, etc.)
  • OFF - PULL-UP resistors WILL NOT be used. This is normally done with Nokia Lumia phones which do not require VccQ and Vcc connections for a more stable link, set switch to "ON" and make sure to connect required power to VccQ and Vcc lines
  • 3.3v - Most of new and old Micro SD cards are compatible with 3.3v Vcc
  • 1.8v - With this option future low-powered Micro SD cards would be supported as well
For eMMC Use Only:
  • NC - Secondary CLOCK will not be used for eMMC communication*
  • CLK2 - Secondary CLOCK will be used for eMMC Communication

*When adapter is used for a NON-EMMC connection such as JTAG or Micro SD card, make sure that DIP switch is set on the "NC" position.
"CLK2" is NOT REQUIRED for most eMMC chips, but setting DIP switch to "CLK2" will give you a stronger CLK (red) signal for better eMMC communication.

ATF-V2 - Package Content:
  • ATF Version 3 All-in-1 Adapter for ATF Box – 1pc.
  • FPC Ribbon Cable – 2pcs.
  • Lumia 510 / 610 Connector – 1pc.
  • Molex Port for Lumia 610/510 – 1pc.
  • BGA PCB 153/169 – 1pc.
  • BGA PCB 182/186 – 1pc.
  • Copper Wire 0.1 mm – 1pc.
  • Cellphone Opening Kit – 1 set.

CREDIT 45 Suggested Price



Bookmark and Share




Related Products

CREDIT 20
HOT
CREDIT 319
HOT
Powered by Dhru Fusion